Struct atsamd_hal::eic::pin::ExtInt0

source · [−]

pub struct ExtInt0<GPIO>where
    GPIO: AnyPin,{ /* private fields */ }

Expand description

Represents a numbered external interrupt. The external interrupt is generic over any pin, only the EicPin implementations in this module make sense.

Implementations

source

impl<GPIO: AnyPin> ExtInt0<GPIO>

source

pub fn new(pin: GPIO) -> Self

Construct pad from the appropriate pin in any mode. You may find it more convenient to use the into_pad trait and avoid referencing the pad type.

source

pub fn enable_event(&mut self, eic: &mut EIC)

Configure the eic with options for this external interrupt

source

pub fn filter(&mut self, _eic: &mut EIC, filter: bool)

Trait Implementations

source

impl<GPIO: AnyPin> ExternalInterrupt for ExtInt0<GPIO>

source

fn id(&self) -> ExternalInterruptID

source

impl<GPIO, C> InputPin for ExtInt0<GPIO>where
GPIO: AnyPin<Mode = Interrupt<C>>,
C: InterruptConfig,

type Error = Infallible

Error type

source

fn is_high(&self) -> Result<bool, Self::Error>

Is the input pin high?

source

fn is_low(&self) -> Result<bool, Self::Error>

Is the input pin low?

Auto Trait Implementations

impl<GPIO> RefUnwindSafe for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: RefUnwindSafe,
<GPIO as AnyPin>::Mode: RefUnwindSafe,

impl<GPIO> Send for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Send,
<GPIO as AnyPin>::Mode: Send,

impl<GPIO> Sync for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Sync,
<GPIO as AnyPin>::Mode: Sync,

impl<GPIO> Unpin for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Unpin,
<GPIO as AnyPin>::Mode: Unpin,

impl<GPIO> UnwindSafe for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: UnwindSafe,
<GPIO as AnyPin>::Mode: UnwindSafe,

Blanket Implementations

source

impl<T> Any for Twhere
T: 'static + ?Sized,

source

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

source

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

source

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

source

impl<T> From<T> for T

const: unstable · source

fn from(t: T) -> T

Returns the argument unchanged.

source

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source

impl<T> Same<T> for T

type Output = T

Should always be Self

source

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

source

impl<T, U> TryInto for Twhere
U: TryFrom<T>,

type Error = >::Error

The type returned in the event of a conversion error.

const: unstable · source

fn try_into(self) -> Result<U, >::Error>

Performs the conversion.

Struct atsamd_hal::eic::pin::ExtInt0

Implementations

impl<GPIO: AnyPin> ExtInt0<GPIO>

pub fn new(pin: GPIO) -> Self

pub fn enable_event(&mut self, eic: &mut EIC)

pub fn enable_interrupt(&mut self, eic: &mut EIC)

pub fn enable_interrupt_wake(&mut self, eic: &mut EIC)

pub fn disable_interrupt(&mut self, eic: &mut EIC)

pub fn is_interrupt(&mut self) -> bool

pub fn clear_interrupt(&mut self)

pub fn sense(&mut self, _eic: &mut EIC, sense: Sense)

pub fn filter(&mut self, _eic: &mut EIC, filter: bool)

Trait Implementations

impl<GPIO: AnyPin> ExternalInterrupt for ExtInt0<GPIO>

fn id(&self) -> ExternalInterruptID

impl<GPIO, C> InputPin for ExtInt0<GPIO>where GPIO: AnyPin<Mode = Interrupt<C>>, C: InterruptConfig,

type Error = Infallible

fn is_high(&self) -> Result<bool, Self::Error>

fn is_low(&self) -> Result<bool, Self::Error>

Auto Trait Implementations

impl<GPIO> RefUnwindSafe for ExtInt0<GPIO>where <GPIO as AnyPin>::Id: RefUnwindSafe, <GPIO as AnyPin>::Mode: RefUnwindSafe,

impl<GPIO> Send for ExtInt0<GPIO>where <GPIO as AnyPin>::Id: Send, <GPIO as AnyPin>::Mode: Send,

impl<GPIO> Sync for ExtInt0<GPIO>where <GPIO as AnyPin>::Id: Sync, <GPIO as AnyPin>::Mode: Sync,

impl<GPIO> Unpin for ExtInt0<GPIO>where <GPIO as AnyPin>::Id: Unpin, <GPIO as AnyPin>::Mode: Unpin,

impl<GPIO> UnwindSafe for ExtInt0<GPIO>where <GPIO as AnyPin>::Id: UnwindSafe, <GPIO as AnyPin>::Mode: UnwindSafe,

Blanket Implementations

impl<T> Any for Twhere T: 'static + ?Sized,

fn type_id(&self) -> TypeId

impl<T> Borrow<T> for Twhere T: ?Sized,

fn borrow(&self) -> &T

impl<T> BorrowMut<T> for Twhere T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

impl<T> From<T> for T

fn from(t: T) -> T

impl<T, U> Into<U> for Twhere U: From<T>,

fn into(self) -> U

impl<T> Same<T> for T

type Output = T

impl<T, U> TryFrom<U> for Twhere U: Into<T>,

type Error = Infallible

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

impl<T, U> TryInto<U> for Twhere U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

impl<GPIO, C> InputPin for ExtInt0<GPIO>where
GPIO: AnyPin<Mode = Interrupt<C>>,
C: InterruptConfig,

impl<GPIO> RefUnwindSafe for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: RefUnwindSafe,
<GPIO as AnyPin>::Mode: RefUnwindSafe,

impl<GPIO> Send for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Send,
<GPIO as AnyPin>::Mode: Send,

impl<GPIO> Sync for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Sync,
<GPIO as AnyPin>::Mode: Sync,

impl<GPIO> Unpin for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: Unpin,
<GPIO as AnyPin>::Mode: Unpin,

impl<GPIO> UnwindSafe for ExtInt0<GPIO>where
<GPIO as AnyPin>::Id: UnwindSafe,
<GPIO as AnyPin>::Mode: UnwindSafe,

impl<T> Any for Twhere
T: 'static + ?Sized,

impl<T> Borrow<T> for Twhere
T: ?Sized,

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

impl<T, U> Into<U> for Twhere
U: From<T>,

impl<T, U> TryFrom<U> for Twhere
U: Into<T>,

impl<T, U> TryInto<U> for Twhere
U: TryFrom<T>,