[−][src]Struct sodaq_one::gpio::Pa25

pub struct Pa25<MODE> { /* fields omitted */ }

Represents the IO pin with the matching name.

Methods

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_floating_input(self, port: &mut Port) -> Pa25<Input<Floating>>`[src]

Configures the pin to operate as a floating input

`pub fn into_pull_down_input(self, port: &mut Port) -> Pa25<Input<PullDown>>`[src]

Configures the pin to operate as a pulled down input pin

`pub fn into_pull_up_input(self, port: &mut Port) -> Pa25<Input<PullUp>>`[src]

Configures the pin to operate as a pulled up input pin

`pub fn into_open_drain_output(self, port: &mut Port) -> Pa25<Output<OpenDrain>>`[src]

Configures the pin to operate as an open drain output

`pub fn into_push_pull_output(self, port: &mut Port) -> Pa25<Output<PushPull>>`[src]

Configures the pin to operate as a push-pull output

`impl Pa25<Output<OpenDrain>>`[src]

`pub fn internal_pull_up(&mut self, port: &mut Port, on: bool)`[src]

Control state of the internal pull up

`impl<MODE> Pa25<Output<MODE>>`[src]

`pub fn toggle(&mut self)`[src]

Toggle the logic level of the pin; if it is currently high, set it low and vice versa.

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_a(self, port: &mut Port) -> Pa25<PfA>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_b(self, port: &mut Port) -> Pa25<PfB>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_c(self, port: &mut Port) -> Pa25<PfC>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_d(self, port: &mut Port) -> Pa25<PfD>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_e(self, port: &mut Port) -> Pa25<PfE>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_f(self, port: &mut Port) -> Pa25<PfF>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_g(self, port: &mut Port) -> Pa25<PfG>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa25<MODE>`[src]

`pub fn into_function_h(self, port: &mut Port) -> Pa25<PfH>`[src]

Configures the pin to operate with a peripheral

Trait Implementations

`impl<MODE> IntoFunction<Pa25<PfC>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfC>`[src]

`impl<MODE> IntoFunction<Pa25<PfE>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfE>`[src]

`impl<MODE> IntoFunction<Pa25<PfD>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfD>`[src]

`impl<MODE> IntoFunction<Pa25<PfB>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfB>`[src]

`impl<MODE> IntoFunction<Pa25<PfF>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfF>`[src]

`impl<MODE> IntoFunction<Pa25<PfH>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfH>`[src]

`impl<MODE> IntoFunction<Pa25<PfG>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfG>`[src]

`impl<MODE> IntoFunction<Pa25<PfA>> for Pa25<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa25<PfA>`[src]

`impl<MODE> OutputPin for Pa25<Output<MODE>>`[src]

`fn set_high(&mut self)`[src]

`fn set_low(&mut self)`[src]

`impl<MODE> PadPin<Sercom5Pad3> for Pa25<MODE>`[src]

`fn into_pad(self, port: &mut Port) -> Sercom5Pad3`[src]

`impl<MODE> PadPin<Sercom3Pad3> for Pa25<MODE>`[src]

`fn into_pad(self, port: &mut Port) -> Sercom3Pad3`[src]

Auto Trait Implementations

`impl<MODE> Send for Pa25<MODE> where MODE: Send,`

`impl<MODE> Sync for Pa25<MODE> where MODE: Sync,`

Blanket Implementations

`impl<T> From for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

The type returned in the event of a conversion error.

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> Borrow for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]