[−][src]Struct circuit_playground_express::gpio::Pa4

pub struct Pa4<MODE> { /* fields omitted */ }

Represents the IO pin with the matching name.

Methods

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_floating_input(self, port: &mut Port) -> Pa4<Input<Floating>>`[src]

Configures the pin to operate as a floating input

`pub fn into_pull_down_input(self, port: &mut Port) -> Pa4<Input<PullDown>>`[src]

Configures the pin to operate as a pulled down input pin

`pub fn into_pull_up_input(self, port: &mut Port) -> Pa4<Input<PullUp>>`[src]

Configures the pin to operate as a pulled up input pin

`pub fn into_open_drain_output(self, port: &mut Port) -> Pa4<Output<OpenDrain>>`[src]

Configures the pin to operate as an open drain output

`pub fn into_push_pull_output(self, port: &mut Port) -> Pa4<Output<PushPull>>`[src]

Configures the pin to operate as a push-pull output

`impl Pa4<Output<OpenDrain>>`[src]

`pub fn internal_pull_up(&mut self, port: &mut Port, on: bool)`[src]

Control state of the internal pull up

`impl<MODE> Pa4<Output<MODE>>`[src]

`pub fn toggle(&mut self)`[src]

Toggle the logic level of the pin; if it is currently high, set it low and vice versa.

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_a(self, port: &mut Port) -> Pa4<PfA>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_b(self, port: &mut Port) -> Pa4<PfB>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_c(self, port: &mut Port) -> Pa4<PfC>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_d(self, port: &mut Port) -> Pa4<PfD>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_e(self, port: &mut Port) -> Pa4<PfE>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_f(self, port: &mut Port) -> Pa4<PfF>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_g(self, port: &mut Port) -> Pa4<PfG>`[src]

Configures the pin to operate with a peripheral

`impl<MODE> Pa4<MODE>`[src]

`pub fn into_function_h(self, port: &mut Port) -> Pa4<PfH>`[src]

Configures the pin to operate with a peripheral

Trait Implementations

`impl<MODE> IntoFunction<Pa4<PfD>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfD>`[src]

`impl<MODE> IntoFunction<Pa4<PfF>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfF>`[src]

`impl<MODE> IntoFunction<Pa4<PfB>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfB>`[src]

`impl<MODE> IntoFunction<Pa4<PfA>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfA>`[src]

`impl<MODE> IntoFunction<Pa4<PfC>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfC>`[src]

`impl<MODE> IntoFunction<Pa4<PfH>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfH>`[src]

`impl<MODE> IntoFunction<Pa4<PfG>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfG>`[src]

`impl<MODE> IntoFunction<Pa4<PfE>> for Pa4<MODE>`[src]

`fn into_function(self, port: &mut Port) -> Pa4<PfE>`[src]

`impl<MODE> OutputPin for Pa4<Output<MODE>>`[src]

`fn set_high(&mut self)`[src]

`fn set_low(&mut self)`[src]

`impl<MODE> PadPin<Sercom0Pad0> for Pa4<MODE>`[src]

`fn into_pad(self, port: &mut Port) -> Sercom0Pad0`[src]

Auto Trait Implementations

`impl<MODE> Send for Pa4<MODE> where MODE: Send,`

`impl<MODE> Sync for Pa4<MODE> where MODE: Sync,`

Blanket Implementations

`impl<T> From for T`[src]

`fn from(t: T) -> T`[src]

`impl<T, U> TryFrom for T where U: Into<T>,` [src]

`type Error = Infallible`

The type returned in the event of a conversion error.

`fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>`[src]

`impl<T, U> TryInto for T where U: TryFrom<T>,` [src]

`type Error = <U as TryFrom<T>>::Error`

The type returned in the event of a conversion error.

`fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>`[src]

`impl<T, U> Into for T where U: From<T>,` [src]

`fn into(self) -> U`[src]

`impl<T> Borrow for T where T: ?Sized,` [src]

`fn borrow(&self) -> &T`[src]

`impl<T> BorrowMut for T where T: ?Sized,` [src]

`fn borrow_mut(&mut self) -> &mut T`[src]

`impl<T> Any for T where T: 'static + ?Sized,` [src]

`fn type_id(&self) -> TypeId`[src]