[][src]Struct arduino_mkrzero::gpio::Pa25

pub struct Pa25<MODE> { /* fields omitted */ }

Represents the IO pin with the matching name.

Methods

impl<MODE> Pa25<MODE>[src]

pub fn into_floating_input(self, port: &mut Port) -> Pa25<Input<Floating>>[src]

Configures the pin to operate as a floating input

pub fn into_pull_down_input(self, port: &mut Port) -> Pa25<Input<PullDown>>[src]

Configures the pin to operate as a pulled down input pin

pub fn into_pull_up_input(self, port: &mut Port) -> Pa25<Input<PullUp>>[src]

Configures the pin to operate as a pulled up input pin

pub fn into_open_drain_output(self, port: &mut Port) -> Pa25<Output<OpenDrain>>[src]

Configures the pin to operate as an open drain output

pub fn into_push_pull_output(self, port: &mut Port) -> Pa25<Output<PushPull>>[src]

Configures the pin to operate as a push-pull output

impl Pa25<Output<OpenDrain>>[src]

pub fn internal_pull_up(&mut self, port: &mut Port, on: bool)[src]

Control state of the internal pull up

impl<MODE> Pa25<Output<MODE>>[src]

pub fn toggle(&mut self)[src]

Toggle the logic level of the pin; if it is currently high, set it low and vice versa.

impl<MODE> Pa25<MODE>[src]

pub fn into_function_a(self, port: &mut Port) -> Pa25<PfA>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_b(self, port: &mut Port) -> Pa25<PfB>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_c(self, port: &mut Port) -> Pa25<PfC>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_d(self, port: &mut Port) -> Pa25<PfD>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_e(self, port: &mut Port) -> Pa25<PfE>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_f(self, port: &mut Port) -> Pa25<PfF>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_g(self, port: &mut Port) -> Pa25<PfG>[src]

Configures the pin to operate with a peripheral

impl<MODE> Pa25<MODE>[src]

pub fn into_function_h(self, port: &mut Port) -> Pa25<PfH>[src]

Configures the pin to operate with a peripheral

Trait Implementations

impl<MODE> IntoFunction<Pa25<PfC>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfE>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfD>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfB>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfF>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfH>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfG>> for Pa25<MODE>[src]

impl<MODE> IntoFunction<Pa25<PfA>> for Pa25<MODE>[src]

impl<MODE> OutputPin for Pa25<Output<MODE>>[src]

impl<MODE> PadPin<Sercom5Pad3> for Pa25<MODE>[src]

impl<MODE> PadPin<Sercom3Pad3> for Pa25<MODE>[src]

Auto Trait Implementations

impl<MODE> Send for Pa25<MODE> where
    MODE: Send

impl<MODE> Sync for Pa25<MODE> where
    MODE: Sync

Blanket Implementations

impl<T> From for T[src]

impl<T, U> TryFrom for T where
    U: Into<T>, 
[src]

type Error = Infallible

The type returned in the event of a conversion error.

impl<T, U> TryInto for T where
    U: TryFrom<T>, 
[src]

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

impl<T, U> Into for T where
    U: From<T>, 
[src]

impl<T> Borrow for T where
    T: ?Sized
[src]

impl<T> BorrowMut for T where
    T: ?Sized
[src]

impl<T> Any for T where
    T: 'static + ?Sized
[src]