Module atsamd_hal::clock

source · [−]
Expand description

Clocking API

Users are encouraged to use v2 variant of an API because of the richer feature set and safety.

Modules

v1
Clocking API v1
v2
Version 2 of the clock module

Structs

AcClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Adc0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Adc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
CclClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Cm4TraceClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
DacClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
EicClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys2Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys4Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys5Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys6Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys7Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys8Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys9Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys10Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys11Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
FreqmMsrClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
FreqmRefClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
GClock
Represents a configured clock generator. Can be converted into the effective clock frequency. Its primary purpose is to be passed in to methods such as GenericClockController::tcc2_tc3 to configure the clock for a peripheral.
GenericClockController
GenericClockController encapsulates the GCLK hardware. It provides a type safe way to configure the system clocks. Initializing the GenericClockController instance configures the system to run at 120MHz by taking the DFLL48 and feeding it into the DPLL0 hardware which multiplies the signal by 2.5x.
I2S0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
I2S1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
PdecClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sdhc0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sdhc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom0CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom1CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom2CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom3CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom4CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom5CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom6CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom7CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc0Tc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc2Tc3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc4Tc5Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc6Tc7Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc0Tcc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc2Tcc3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc4Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
UsbClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.

Enums

ClockId

Constants

OSC32K_FREQ
The frequency of the 32Khz source.
OSC48M_FREQ
The frequency of the 48Mhz source.
OSC120M_FREQ
The frequency of the 120Mhz source.

Type Definitions

ClockGenId
ClockSource