Module atsamd_hal::clock::v1

source · [−]
Expand description

Clocking API v1

Configuring the system clock sources. You will typically need to create an instance of GenericClockController before you can set up most of the peripherals on the atsamd51 device. The other types in this module are used to enforce at compile time that the peripherals have been correctly configured.

Structs

AcClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Adc0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Adc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
CclClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Cm4TraceClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
DacClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
EicClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys2Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys4Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys5Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys6Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys7Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys8Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys9Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys10Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Evsys11Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
FreqmMsrClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
FreqmRefClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
GClock
Represents a configured clock generator. Can be converted into the effective clock frequency. Its primary purpose is to be passed in to methods such as GenericClockController::tcc2_tc3 to configure the clock for a peripheral.
GenericClockController
GenericClockController encapsulates the GCLK hardware. It provides a type safe way to configure the system clocks. Initializing the GenericClockController instance configures the system to run at 120MHz by taking the DFLL48 and feeding it into the DPLL0 hardware which multiplies the signal by 2.5x.
I2S0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
I2S1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
PdecClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sdhc0Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom0CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom1CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom2CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom3CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom4CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Sercom5CoreClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc0Tc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc2Tc3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tc4Tc5Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc0Tcc1Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc2Tcc3Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
Tcc4Clock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.
UsbClock
A typed token that indicates that the clock for the peripheral(s) with the matching name has been configured. The effective clock frequency is available via the freq method, or by converting the object into a Hertz instance. The peripheral initialization code will typically require passing in this object to prove at compile time that the clock has been correctly initialized.

Enums

ClockId

Constants

OSC32K_FREQ
The frequency of the 32Khz source.
OSC48M_FREQ
The frequency of the 48Mhz source.
OSC120M_FREQ
The frequency of the 120Mhz source.

Type Definitions

ClockGenId
ClockSource