atsamd51g/tc0/
count32.rs

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
#[repr(C)]
#[doc = "32-bit Counter Mode"]
#[doc(alias = "COUNT32")]
pub struct Count32 {
    ctrla: Ctrla,
    ctrlbclr: Ctrlbclr,
    ctrlbset: Ctrlbset,
    evctrl: Evctrl,
    intenclr: Intenclr,
    intenset: Intenset,
    intflag: Intflag,
    status: Status,
    wave: Wave,
    drvctrl: Drvctrl,
    _reserved10: [u8; 0x01],
    dbgctrl: Dbgctrl,
    syncbusy: Syncbusy,
    count: Count,
    _reserved13: [u8; 0x04],
    cc: [Cc; 2],
    _reserved14: [u8; 0x0c],
    ccbuf: [Ccbuf; 2],
}
impl Count32 {
    #[doc = "0x00 - Control A"]
    #[inline(always)]
    pub const fn ctrla(&self) -> &Ctrla {
        &self.ctrla
    }
    #[doc = "0x04 - Control B Clear"]
    #[inline(always)]
    pub const fn ctrlbclr(&self) -> &Ctrlbclr {
        &self.ctrlbclr
    }
    #[doc = "0x05 - Control B Set"]
    #[inline(always)]
    pub const fn ctrlbset(&self) -> &Ctrlbset {
        &self.ctrlbset
    }
    #[doc = "0x06 - Event Control"]
    #[inline(always)]
    pub const fn evctrl(&self) -> &Evctrl {
        &self.evctrl
    }
    #[doc = "0x08 - Interrupt Enable Clear"]
    #[inline(always)]
    pub const fn intenclr(&self) -> &Intenclr {
        &self.intenclr
    }
    #[doc = "0x09 - Interrupt Enable Set"]
    #[inline(always)]
    pub const fn intenset(&self) -> &Intenset {
        &self.intenset
    }
    #[doc = "0x0a - Interrupt Flag Status and Clear"]
    #[inline(always)]
    pub const fn intflag(&self) -> &Intflag {
        &self.intflag
    }
    #[doc = "0x0b - Status"]
    #[inline(always)]
    pub const fn status(&self) -> &Status {
        &self.status
    }
    #[doc = "0x0c - Waveform Generation Control"]
    #[inline(always)]
    pub const fn wave(&self) -> &Wave {
        &self.wave
    }
    #[doc = "0x0d - Control C"]
    #[inline(always)]
    pub const fn drvctrl(&self) -> &Drvctrl {
        &self.drvctrl
    }
    #[doc = "0x0f - Debug Control"]
    #[inline(always)]
    pub const fn dbgctrl(&self) -> &Dbgctrl {
        &self.dbgctrl
    }
    #[doc = "0x10 - Synchronization Status"]
    #[inline(always)]
    pub const fn syncbusy(&self) -> &Syncbusy {
        &self.syncbusy
    }
    #[doc = "0x14 - COUNT32 Count"]
    #[inline(always)]
    pub const fn count(&self) -> &Count {
        &self.count
    }
    #[doc = "0x1c..0x24 - COUNT32 Compare and Capture"]
    #[inline(always)]
    pub const fn cc(&self, n: usize) -> &Cc {
        &self.cc[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x1c..0x24 - COUNT32 Compare and Capture"]
    #[inline(always)]
    pub fn cc_iter(&self) -> impl Iterator<Item = &Cc> {
        self.cc.iter()
    }
    #[doc = "0x30..0x38 - COUNT32 Compare and Capture Buffer"]
    #[inline(always)]
    pub const fn ccbuf(&self, n: usize) -> &Ccbuf {
        &self.ccbuf[n]
    }
    #[doc = "Iterator for array of:"]
    #[doc = "0x30..0x38 - COUNT32 Compare and Capture Buffer"]
    #[inline(always)]
    pub fn ccbuf_iter(&self) -> impl Iterator<Item = &Ccbuf> {
        self.ccbuf.iter()
    }
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "CTRLBCLR (rw) register accessor: Control B Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlbclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlbclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlbclr`]
module"]
#[doc(alias = "CTRLBCLR")]
pub type Ctrlbclr = crate::Reg<ctrlbclr::CtrlbclrSpec>;
#[doc = "Control B Clear"]
pub mod ctrlbclr;
#[doc = "CTRLBSET (rw) register accessor: Control B Set\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlbset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlbset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlbset`]
module"]
#[doc(alias = "CTRLBSET")]
pub type Ctrlbset = crate::Reg<ctrlbset::CtrlbsetSpec>;
#[doc = "Control B Set"]
pub mod ctrlbset;
#[doc = "EVCTRL (rw) register accessor: Event Control\n\nYou can [`read`](crate::Reg::read) this register and get [`evctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
#[doc(alias = "EVCTRL")]
pub type Evctrl = crate::Reg<evctrl::EvctrlSpec>;
#[doc = "Event Control"]
pub mod evctrl;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (rw) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "Status"]
pub mod status;
#[doc = "WAVE (rw) register accessor: Waveform Generation Control\n\nYou can [`read`](crate::Reg::read) this register and get [`wave::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wave::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wave`]
module"]
#[doc(alias = "WAVE")]
pub type Wave = crate::Reg<wave::WaveSpec>;
#[doc = "Waveform Generation Control"]
pub mod wave;
#[doc = "DRVCTRL (rw) register accessor: Control C\n\nYou can [`read`](crate::Reg::read) this register and get [`drvctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`drvctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@drvctrl`]
module"]
#[doc(alias = "DRVCTRL")]
pub type Drvctrl = crate::Reg<drvctrl::DrvctrlSpec>;
#[doc = "Control C"]
pub mod drvctrl;
#[doc = "DBGCTRL (rw) register accessor: Debug Control\n\nYou can [`read`](crate::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
module"]
#[doc(alias = "DBGCTRL")]
pub type Dbgctrl = crate::Reg<dbgctrl::DbgctrlSpec>;
#[doc = "Debug Control"]
pub mod dbgctrl;
#[doc = "SYNCBUSY (r) register accessor: Synchronization Status\n\nYou can [`read`](crate::Reg::read) this register and get [`syncbusy::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@syncbusy`]
module"]
#[doc(alias = "SYNCBUSY")]
pub type Syncbusy = crate::Reg<syncbusy::SyncbusySpec>;
#[doc = "Synchronization Status"]
pub mod syncbusy;
#[doc = "COUNT (rw) register accessor: COUNT32 Count\n\nYou can [`read`](crate::Reg::read) this register and get [`count::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`count::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@count`]
module"]
#[doc(alias = "COUNT")]
pub type Count = crate::Reg<count::CountSpec>;
#[doc = "COUNT32 Count"]
pub mod count;
#[doc = "CC (rw) register accessor: COUNT32 Compare and Capture\n\nYou can [`read`](crate::Reg::read) this register and get [`cc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cc`]
module"]
#[doc(alias = "CC")]
pub type Cc = crate::Reg<cc::CcSpec>;
#[doc = "COUNT32 Compare and Capture"]
pub mod cc;
#[doc = "CCBUF (rw) register accessor: COUNT32 Compare and Capture Buffer\n\nYou can [`read`](crate::Reg::read) this register and get [`ccbuf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ccbuf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ccbuf`]
module"]
#[doc(alias = "CCBUF")]
pub type Ccbuf = crate::Reg<ccbuf::CcbufSpec>;
#[doc = "COUNT32 Compare and Capture Buffer"]
pub mod ccbuf;