#[repr(C)]
#[doc = "Register block"]
pub struct RegisterBlock {
ctrla: Ctrla,
ctrlb: Ctrlb,
evctrl: Evctrl,
_reserved3: [u8; 0x01],
intenclr: Intenclr,
intenset: Intenset,
intflag: Intflag,
status: Status,
data: Data,
_reserved8: [u8; 0x02],
databuf: Databuf,
}
impl RegisterBlock {
#[doc = "0x00 - Control A"]
#[inline(always)]
pub const fn ctrla(&self) -> &Ctrla {
&self.ctrla
}
#[doc = "0x01 - Control B"]
#[inline(always)]
pub const fn ctrlb(&self) -> &Ctrlb {
&self.ctrlb
}
#[doc = "0x02 - Event Control"]
#[inline(always)]
pub const fn evctrl(&self) -> &Evctrl {
&self.evctrl
}
#[doc = "0x04 - Interrupt Enable Clear"]
#[inline(always)]
pub const fn intenclr(&self) -> &Intenclr {
&self.intenclr
}
#[doc = "0x05 - Interrupt Enable Set"]
#[inline(always)]
pub const fn intenset(&self) -> &Intenset {
&self.intenset
}
#[doc = "0x06 - Interrupt Flag Status and Clear"]
#[inline(always)]
pub const fn intflag(&self) -> &Intflag {
&self.intflag
}
#[doc = "0x07 - Status"]
#[inline(always)]
pub const fn status(&self) -> &Status {
&self.status
}
#[doc = "0x08 - Data"]
#[inline(always)]
pub const fn data(&self) -> &Data {
&self.data
}
#[doc = "0x0c - Data Buffer"]
#[inline(always)]
pub const fn databuf(&self) -> &Databuf {
&self.databuf
}
}
#[doc = "CTRLA (rw) register accessor: Control A\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrla::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrla::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrla`]
module"]
#[doc(alias = "CTRLA")]
pub type Ctrla = crate::Reg<ctrla::CtrlaSpec>;
#[doc = "Control A"]
pub mod ctrla;
#[doc = "CTRLB (rw) register accessor: Control B\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrlb::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrlb::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrlb`]
module"]
#[doc(alias = "CTRLB")]
pub type Ctrlb = crate::Reg<ctrlb::CtrlbSpec>;
#[doc = "Control B"]
pub mod ctrlb;
#[doc = "EVCTRL (rw) register accessor: Event Control\n\nYou can [`read`](crate::Reg::read) this register and get [`evctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
module"]
#[doc(alias = "EVCTRL")]
pub type Evctrl = crate::Reg<evctrl::EvctrlSpec>;
#[doc = "Event Control"]
pub mod evctrl;
#[doc = "INTENCLR (rw) register accessor: Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
module"]
#[doc(alias = "INTENCLR")]
pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
#[doc = "Interrupt Enable Clear"]
pub mod intenclr;
#[doc = "INTENSET (rw) register accessor: Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
module"]
#[doc(alias = "INTENSET")]
pub type Intenset = crate::Reg<intenset::IntensetSpec>;
#[doc = "Interrupt Enable Set"]
pub mod intenset;
#[doc = "INTFLAG (rw) register accessor: Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
module"]
#[doc(alias = "INTFLAG")]
pub type Intflag = crate::Reg<intflag::IntflagSpec>;
#[doc = "Interrupt Flag Status and Clear"]
pub mod intflag;
#[doc = "STATUS (r) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
module"]
#[doc(alias = "STATUS")]
pub type Status = crate::Reg<status::StatusSpec>;
#[doc = "Status"]
pub mod status;
#[doc = "DATA (rw) register accessor: Data\n\nYou can [`read`](crate::Reg::read) this register and get [`data::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`data::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@data`]
module"]
#[doc(alias = "DATA")]
pub type Data = crate::Reg<data::DataSpec>;
#[doc = "Data"]
pub mod data;
#[doc = "DATABUF (rw) register accessor: Data Buffer\n\nYou can [`read`](crate::Reg::read) this register and get [`databuf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`databuf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@databuf`]
module"]
#[doc(alias = "DATABUF")]
pub type Databuf = crate::Reg<databuf::DatabufSpec>;
#[doc = "Data Buffer"]
pub mod databuf;