atsamd11d/rtc/
mode0.rs

Help
1#[repr(C)]
2#[doc = "32-bit Counter with Single 32-bit Compare"]
3#[doc(alias = "MODE0")]
4pub struct Mode0 {
5    ctrl: Ctrl,
6    readreq: Readreq,
7    evctrl: Evctrl,
8    intenclr: Intenclr,
9    intenset: Intenset,
10    intflag: Intflag,
11    _reserved6: [u8; 0x01],
12    status: Status,
13    dbgctrl: Dbgctrl,
14    freqcorr: Freqcorr,
15    _reserved9: [u8; 0x03],
16    count: Count,
17    _reserved10: [u8; 0x04],
18    comp: [Comp; 1],
19}
20impl Mode0 {
21    #[doc = "0x00 - MODE0 Control"]
22    #[inline(always)]
23    pub const fn ctrl(&self) -> &Ctrl {
24        &self.ctrl
25    }
26    #[doc = "0x02 - Read Request"]
27    #[inline(always)]
28    pub const fn readreq(&self) -> &Readreq {
29        &self.readreq
30    }
31    #[doc = "0x04 - MODE0 Event Control"]
32    #[inline(always)]
33    pub const fn evctrl(&self) -> &Evctrl {
34        &self.evctrl
35    }
36    #[doc = "0x06 - MODE0 Interrupt Enable Clear"]
37    #[inline(always)]
38    pub const fn intenclr(&self) -> &Intenclr {
39        &self.intenclr
40    }
41    #[doc = "0x07 - MODE0 Interrupt Enable Set"]
42    #[inline(always)]
43    pub const fn intenset(&self) -> &Intenset {
44        &self.intenset
45    }
46    #[doc = "0x08 - MODE0 Interrupt Flag Status and Clear"]
47    #[inline(always)]
48    pub const fn intflag(&self) -> &Intflag {
49        &self.intflag
50    }
51    #[doc = "0x0a - Status"]
52    #[inline(always)]
53    pub const fn status(&self) -> &Status {
54        &self.status
55    }
56    #[doc = "0x0b - Debug Control"]
57    #[inline(always)]
58    pub const fn dbgctrl(&self) -> &Dbgctrl {
59        &self.dbgctrl
60    }
61    #[doc = "0x0c - Frequency Correction"]
62    #[inline(always)]
63    pub const fn freqcorr(&self) -> &Freqcorr {
64        &self.freqcorr
65    }
66    #[doc = "0x10 - MODE0 Counter Value"]
67    #[inline(always)]
68    pub const fn count(&self) -> &Count {
69        &self.count
70    }
71    #[doc = "0x18 - MODE0 Compare n Value"]
72    #[inline(always)]
73    pub const fn comp(&self, n: usize) -> &Comp {
74        &self.comp[n]
75    }
76    #[doc = "Iterator for array of:"]
77    #[doc = "0x18 - MODE0 Compare n Value"]
78    #[inline(always)]
79    pub fn comp_iter(&self) -> impl Iterator<Item = &Comp> {
80        self.comp.iter()
81    }
82}
83#[doc = "CTRL (rw) register accessor: MODE0 Control\n\nYou can [`read`](crate::Reg::read) this register and get [`ctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ctrl`]
84module"]
85#[doc(alias = "CTRL")]
86pub type Ctrl = crate::Reg<ctrl::CtrlSpec>;
87#[doc = "MODE0 Control"]
88pub mod ctrl;
89#[doc = "READREQ (rw) register accessor: Read Request\n\nYou can [`read`](crate::Reg::read) this register and get [`readreq::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`readreq::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@readreq`]
90module"]
91#[doc(alias = "READREQ")]
92pub type Readreq = crate::Reg<readreq::ReadreqSpec>;
93#[doc = "Read Request"]
94pub mod readreq;
95#[doc = "EVCTRL (rw) register accessor: MODE0 Event Control\n\nYou can [`read`](crate::Reg::read) this register and get [`evctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`evctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@evctrl`]
96module"]
97#[doc(alias = "EVCTRL")]
98pub type Evctrl = crate::Reg<evctrl::EvctrlSpec>;
99#[doc = "MODE0 Event Control"]
100pub mod evctrl;
101#[doc = "INTENCLR (rw) register accessor: MODE0 Interrupt Enable Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intenclr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenclr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenclr`]
102module"]
103#[doc(alias = "INTENCLR")]
104pub type Intenclr = crate::Reg<intenclr::IntenclrSpec>;
105#[doc = "MODE0 Interrupt Enable Clear"]
106pub mod intenclr;
107#[doc = "INTENSET (rw) register accessor: MODE0 Interrupt Enable Set\n\nYou can [`read`](crate::Reg::read) this register and get [`intenset::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intenset::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intenset`]
108module"]
109#[doc(alias = "INTENSET")]
110pub type Intenset = crate::Reg<intenset::IntensetSpec>;
111#[doc = "MODE0 Interrupt Enable Set"]
112pub mod intenset;
113#[doc = "INTFLAG (rw) register accessor: MODE0 Interrupt Flag Status and Clear\n\nYou can [`read`](crate::Reg::read) this register and get [`intflag::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`intflag::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@intflag`]
114module"]
115#[doc(alias = "INTFLAG")]
116pub type Intflag = crate::Reg<intflag::IntflagSpec>;
117#[doc = "MODE0 Interrupt Flag Status and Clear"]
118pub mod intflag;
119#[doc = "STATUS (rw) register accessor: Status\n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`status::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`]
120module"]
121#[doc(alias = "STATUS")]
122pub type Status = crate::Reg<status::StatusSpec>;
123#[doc = "Status"]
124pub mod status;
125#[doc = "DBGCTRL (rw) register accessor: Debug Control\n\nYou can [`read`](crate::Reg::read) this register and get [`dbgctrl::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dbgctrl::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dbgctrl`]
126module"]
127#[doc(alias = "DBGCTRL")]
128pub type Dbgctrl = crate::Reg<dbgctrl::DbgctrlSpec>;
129#[doc = "Debug Control"]
130pub mod dbgctrl;
131#[doc = "FREQCORR (rw) register accessor: Frequency Correction\n\nYou can [`read`](crate::Reg::read) this register and get [`freqcorr::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`freqcorr::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@freqcorr`]
132module"]
133#[doc(alias = "FREQCORR")]
134pub type Freqcorr = crate::Reg<freqcorr::FreqcorrSpec>;
135#[doc = "Frequency Correction"]
136pub mod freqcorr;
137#[doc = "COUNT (rw) register accessor: MODE0 Counter Value\n\nYou can [`read`](crate::Reg::read) this register and get [`count::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`count::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@count`]
138module"]
139#[doc(alias = "COUNT")]
140pub type Count = crate::Reg<count::CountSpec>;
141#[doc = "MODE0 Counter Value"]
142pub mod count;
143#[doc = "COMP (rw) register accessor: MODE0 Compare n Value\n\nYou can [`read`](crate::Reg::read) this register and get [`comp::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`comp::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@comp`]
144module"]
145#[doc(alias = "COMP")]
146pub type Comp = crate::Reg<comp::CompSpec>;
147#[doc = "MODE0 Compare n Value"]
148pub mod comp;
atsamd11d/rtc/mode0.rs

atsamd11d/rtc/
mode0.rs
